Citation: | Song Wei, Lu Wei, Jiang Zenghui. Wind tunnel drop model test of nose cap separation of supersonic vehicle[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 31(6): 45-50, 70. doi: 10.11729/syltlx20170026 |
[1] |
朱学昌, 李浩远, 喻天翔, 等.低空高速飞行器整流罩分离技术研究现状和展望[J].固体火箭技术, 2014, 37(1):12-17. http://www.wenkuxiazai.com/doc/70855b5aa6c30c2259019ef1.html
Zhu X C, Li H Y, Yu T X, et al. Research status and prospects for low-altitude and high speed fairing separation technique[J]. Journal of Solid Rocket Technology, 2014, 37(1):12-17. http://www.wenkuxiazai.com/doc/70855b5aa6c30c2259019ef1.html
|
[2] |
范庆志, 孙秦.飞行器头罩分离技术及设计方案分析研究[J].机械设计与制造, 2008, (9):8-10. http://d.wanfangdata.com.cn/Periodical/jxsjyzz200809004
Fan Q Z, Sun Q. The research of aircraft shroud separation technology and design project analysis[J]. Machinery Design Manufacture, 2008, (9):8-10. http://d.wanfangdata.com.cn/Periodical/jxsjyzz200809004
|
[3] |
刘君, 王巍, 郭正, 等.稠密大气层内火箭头罩动态分离过程数值模拟[J].弹道学报, 2006, 18(3):34-38. http://www.cqvip.com/QK/92261X/200603/22996105.html
Liu J, Wang W, Guo Z, et al. Numerical simulation of the detaching process for rocket mantles in low altitude[J]. Journal of Ballistics, 2006, 18(3):34-38. http://www.cqvip.com/QK/92261X/200603/22996105.html
|
[4] |
王巍, 刘君, 白晓征.非结构动网格技术及其在超声速飞行器头罩分离模拟的应用[J].空气动力学学报, 2008, 26(1):131-135. http://www.wenkuxiazai.com/doc/c0ebe14d3b3567ec102d8ab7.html
Wang W, Liu J, Bai X Z. DUM research and apply to solve the fairing separating form hypersonic vehicle[J]. Acta Aerodynamic Sinica, 2008, 26(1):131-135. http://www.wenkuxiazai.com/doc/c0ebe14d3b3567ec102d8ab7.html
|
[5] |
李盾. 三维非结构直角网格NS方程计算及抛罩分离过程的数值模拟研究[D]. 北京: 中国航天空气动力技术研究院, 2006.
|
[6] |
赵晓慧. 巡航导弹锥形头罩分离仿真分析[D]. 长沙: 国防科学技术大学, 2009. http://cdmd.cnki.com.cn/Article/CDMD-90002-2010165460.htm
Zhao X H. Design and simulation for the separation of a taper nose cap from a cruise missile[D]. Changsha:National University of Defense Technology, 2009. http://cdmd.cnki.com.cn/Article/CDMD-90002-2010165460.htm
|
[7] |
曾江. 导弹抛整流罩过程建模与仿真[D]. 长沙: 国防科学技术大学, 2005. http://cdmd.cnki.com.cn/Article/CDMD-90002-2005144130.htm
Zeng J. The modeling and simulation of the process of casting radoms of rocket[D]. Changsha:National University of Defense Technology, 2005. http://cdmd.cnki.com.cn/Article/CDMD-90002-2005144130.htm
|
[8] |
徐敏, 刘振.基于多块嵌套结构动网格的拦截弹防热保护罩的二维分离模拟[J].计算力学学报, 2007, 24(3):375-378. http://www.cnki.com.cn/Article/CJFDTotal-LTJX201503008.htm
Xu M, Liu Z. Two-dimensional simulations about the separation of the interceptor missile shroud covers based on moving multi-block chimera structure grids[J]. Chinese Journal of Computational Mechanics, 2007, 24(3):375-378. http://www.cnki.com.cn/Article/CJFDTotal-LTJX201503008.htm
|
[9] |
Chamberlain R, Baltar J. Time accurate calculation of hypersonic shroud separation[R]. AIAA-93-0317, 1993. doi: 10.2514/6.1993-317
|
[10] |
Chamberlain R. Time accurate calculation of the HEDI shroud separation event[R]. AIAA-92-2775, 1992. doi: 10.2514/6.1992-2775
|
[11] |
Schwaniger A J, Murphree H I. Description of a mathematical model and computer simulation of separation of the nose cap from the solid rocket booster[R]. NASA-TM-82511, 1982. https://www.researchgate.net/publication/23883281_Description_of_a_mathematical_model_and_computer_simulation_of_separation_of_the_nose_cap_from_the_solid_rocket_booster
|
[12] |
Wong K J, Van Dam C P. Numerical study on the effect of tip-cap shape on wing aerodynamic characteristics[R]. AIAA-95-0042, 1995. doi: 10.2514/6.1995-42
|
[13] |
Lawrence R, Leonard Z, Allwine J. Hypersonic shroud separation testing and modelling capabilities at the naval surface warfare center hypervelocity wind tunnel#9[R]. AIAA-94-2495, 1994. http://www.researchgate.net/publication/269060450_Hypersonic_shroud_separation_testing_and_modelling_capabilities_at_the_Naval_Surface_Warfare_Center_hypervelocity_wind_tunnel_9
|
[14] |
Resch L, Hedlund E, Decesaris C. Hypersonic shroud separation testing at the naval surface warfare center hypervelocity wind tunnel#9[R]. AIAA-92-2752, 1992. doi: 10.2514/6.1992-2757
|
[15] |
Resch L, Decesaris C, Hedlund E. The naval surface warfare center hypervelocity wind tunnel 9 hypersonic shroud separation testing capability[R]. AIAA-92-0676, 1992. doi: 10.2514/6.1992-676
|
[16] |
Lumb S B, Robert W C. Transient aerodynamics of a high dynamic pressure shroud separation for a ground-based interceptor missile[R]. AIAA-92-2820, 1992. doi: 10.2514/6.1992-2820
|
[17] |
Michael S H, John H, Matthew M, et al. Development and application of a new ground test capability to conduct full-scale shroud and stage separation studies at duplicated flight conditions[R]. AIAA-2005-696, 2005. doi: 10.2514/6.2005-696
|
[18] |
Michael S H, Timothy P W, Gregory J S, et al. Experimental and numerical studies on hypersonic vehicle performance in the LENS shock and expansion tunnels[R]. AIAA-2006-0125, 2006. doi: 10.2514/6.2006-125
|
[19] |
鲍国华.风洞特种实验[M].西安:西北工业大学出版社, 1990:123-126.
|
[20] |
蒋增辉, 宋威, 鲁伟, 等.高速风洞投放模型试验技术的关键问题及应用领域[J].空气动力学学报, 2016, 34(6):744-750. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=kqdx201606009&dbname=CJFD&dbcode=CJFQ
Jiang Z H, Song W, Lu W, et al. Critical problems and applied fields of drop model testing technique in high speed wind tunnel[J]. Acta Aerodynamic Sinica, 2016, 34(6):744-750. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=kqdx201606009&dbname=CJFD&dbcode=CJFQ
|