WANG Min, LI Jiafu, ZAN Tao, MA Gangjian, ZHOU Shuang. Identification of CNC Machine Tools’ Geometric Errors Based on Circular Tests[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 43(1): 58-64. doi: 10.11936/bjutxb2016010070
Citation: WANG Min, LI Jiafu, ZAN Tao, MA Gangjian, ZHOU Shuang. Identification of CNC Machine Tools’ Geometric Errors Based on Circular Tests[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 43(1): 58-64. doi: 10.11936/bjutxb2016010070

Identification of CNC Machine Tools’ Geometric Errors Based on Circular Tests

doi: 10.11936/bjutxb2016010070
  • Received Date: 30 Jan 2016
    Available Online: 09 Sep 2022
  • Issue Publish Date: 01 Jan 2017
  • To identify the geometric errors of three-axis vertical CNC machine tools, the circular motion trajectories of three-axis vertical machine tools were modeled by using the theory of multi-body system. Based on the numerical simulations of circular motion trajectories, the influence mechanism of the typical geometric errors on the circular motion trajectories was analyzed. Considering the influence of multiple geometric errors on the circular motion trajectory, this paper put forward a geometric errors identification method, which can identify all 21 geometric errors of three-axis vertical machine tools based on the least squares method and polynomial based error modeling. Numerical simulation results demonstrate the accuracy and feasibility of this method.

     

  • [1]
    WU J Y, LI J S.The CNC machine tools’ analysis and research of geometric error[J]. Mining & Processing Equipment, 2003(3): 55-57. (in Chinese)
    [2]
    LIU H L.Research on the geometric error measurement and error compensation of the numerical control machine
    [3]
    tools [D].tools [D]. Wuhan: Huazhong University of Science and Technology, 2005. (in Chinese)
    [3]
    HEUI J P, YOUNG S K, JOON H M.A new technique for volumetric error assessment of CNC machine tools incorporating ball bar measurement and 3D volumetric error model[J]. International Journal of Machine Tools & Manufacture, 1997, 37(11): 1583-1596.
    [4]
    HU J Z.Research on identification of kinematic errors and prediction of machining precision particular to five-axis NC machine tool [D]. Beijing: Beijing University of Technology, 2010. (in Chinese)
    [5]
    SHEN Y B, LIU J T, LI J S.Measurement and differentiating of machine tool errors by cross grid encoder[J]. Journal of Henan University of Science and Technology, 2003, 24(3): 37-39. (in Chinese)
    [6]
    ZHOU Y, CHEN J H, JIAN Z X.Circular testing for NC machine tools by Heidenhain plane grating[J]. Mechanical & Electrical Engineering Technology, 2005, 34(10): 48-51. (in Chinese)
    [7]
    SU S P.Study on the methods of precision modeling and error compensation for multi-axis CNC machine tools [D]. Changsha: National University of Defense Technology, 2002. (in Chinese)
    [8]
    KOU J.New methods for error identification and diagnosis of CNC machine tools [D]. Dalian: Dalian University of Technology, 2013. (in Chinese)
    [9]
    ZHANG M.Identification and analysis of motion error for NC machine tools [D]. Luoyang: Henan University of Science and Technology, 2008. (in Chinese)
    [10]
    LIU J T, SHEN Y B, LI J S.Error measurement and compensation of CNC machining centers using cross grid encoder[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2004(4): 76-77. (in Chinese)
    [11]
    北京机床研究所. 机床检验通则: 第4部分数控机床的圆检验GB/T17421. 4—2003[S]. 北京: 中国标准出版社, 2003.
    [12]
    KONG Y M, LING X Z, XU Y L.Study on the method of comparing circular interpolation spot of based on the method of symbol distinguish[J]. Journal of Nanjing Normal University, 2012, 12(2): 64-68. (in Chinese)
    [13]
    WANG H.Research of non-contact measurement by circular testing for geometric error of NC machine tools [D]. Xi’an: Xi’an University of Technology, 2007. (in Chinese)
  • Relative Articles

    [1]SHI Zhaoyao, ZHAO Baoya, YU Bo, SUN Yanqiang. Unified Model of Gear Characteristic Lines and Its Application in the Evaluation of Gears 3D Deviation[J]. JOURNAL OF MECHANICAL ENGINEERING, 2022, 58(24): 1-9. doi: 10.3901/JME.2022.24.001
    [2]LAI Tao, PENG Xiaoqiang, XU Chao, DAI Yifan, HU Hao, LIU Junfeng. Single Geometric Error Model of 3-axis Measurement Machine Based on Topological Structure[J]. JOURNAL OF MECHANICAL ENGINEERING, 2022, 58(24): 10-19. doi: 10.3901/JME.2022.24.010
    [3]Yang Jinlong, Jia Hongzhi, Jin Tao, Xiang Huazhong, Zhang Dawei, Zhuang Songlin. Error model analysis and correlation correction of Hartmann's focimeter[J]. JOURNAL OF MECHANICAL ENGINEERING, 2021, 48(3): 200238. doi: 10.12086/oee.2021.200238
    [4]Hu Gang, Xu Li-Peng, Xu Xiang. Identification of important nodes based on dynamic evolution of inter-layer isomorphism rate in temporal networks[J]. JOURNAL OF MECHANICAL ENGINEERING, 2021, 70(10): 108901. doi: 10.7498/aps.70.20201804
    [5]Li Tao, Li Chun-Qing, Zhou Hou-Bing, Wang Ning. Test of nuclear mass models[J]. JOURNAL OF MECHANICAL ENGINEERING, 2021, 70(10): 102101. doi: 10.7498/aps.70.20201734
    [6]LIN Shuchao, TANG Zhenyun, HUANG Li, GUO Jun, LI Zhenbao. Effect of Shaking Table Errors on Specimen Response and Its Correction Measures[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 43(1): 118-126. doi: 10.11936/bjutxb2016040073
    [7]FAN Jinwei, WANG Hongliang, ZHANG Lanqing, TANG Yuhang. Motion Error Analysis and Modeling Technology of CNC Camshaft Grinder[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 43(2): 203-209. doi: 10.11936/bjutxb2016040015
  • Created with Highcharts 5.0.7Amount of accessChart context menuAbstract Views, HTML Views, PDF Downloads StatisticsAbstract ViewsHTML ViewsPDF Downloads2024-052024-062024-072024-082024-092024-102024-112024-122025-012025-022025-032025-040123456
    Created with Highcharts 5.0.7Chart context menuAccess Class DistributionFULLTEXT: 37.8 %FULLTEXT: 37.8 %META: 62.2 %META: 62.2 %FULLTEXTMETA
    Created with Highcharts 5.0.7Chart context menuAccess Area Distribution其他: 5.2 %其他: 5.2 %哥伦布: 1.5 %哥伦布: 1.5 %张家口: 1.5 %张家口: 1.5 %德罕: 1.5 %德罕: 1.5 %石家庄: 0.7 %石家庄: 0.7 %芒廷维尤: 54.1 %芒廷维尤: 54.1 %芝加哥: 0.7 %芝加哥: 0.7 %西宁: 34.1 %西宁: 34.1 %青岛: 0.7 %青岛: 0.7 %其他哥伦布张家口德罕石家庄芒廷维尤芝加哥西宁青岛

Catalog

    Figures(9)  / Tables(1)

    Article Metrics

    Article views(83) PDF downloads(0) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return