Citation: | LIN Shuchao, TANG Zhenyun, HUANG Li, GUO Jun, LI Zhenbao. Effect of Shaking Table Errors on Specimen Response and Its Correction Measures[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 43(1): 118-126. doi: 10.11936/bjutxb2016040073 |
[1] |
WANG J T, JIN F, ZHANG C H.Advances in the dynamic testing method of structures[J]. Journal of Earthquake Engineering and Engineering Vibration, 2005, 25(4): 37-43. (in Chinese)
|
[2] |
LU X L, WANG D, WANG S S.Investigation of the seismic response of high-rise buildings supported on tension-resistant elastomeric isolation bearings[J]. Earthquake Engineering & Structural Dynamics, 2016, 13(45): 2207-2228.
|
[3] |
黄浩华. 地震模拟振动台的设计与应用技术[M]. 北京: 地震出版社, 2008: 196-201.
|
[4] |
CAO W L, WANG Y H, DONG H Y, et al.Shaking table test study on shear walls with concrete-filled steel tube columns and embedded steel-plate[J]. Journal of Earthquake Engineering and Engineering Vibration, 2011, 31(2): 75-81. (in Chinese)
|
[5] |
ABEDI-HAYATI S, AUSLANDER D M.Control of multi-actuator electro-hydraulic shaking tables[J]. Fluidics Quarterly, 1979, 11(1): 1-16.
|
[6] |
TANG Z Y, LI Z B, JI J B, et al.Development in shaking table system[J]. Journal of Earthquake Engineering and Engineering Vibration, 2009, 29(6): 162-169. (in Chinese)
|
[7] |
SEVERN R T.The development of shaking tables-a historical note[J]. Earthquake Engineering & Structural Dynamics, 2011, 40(2): 195-213.
|
[8] |
YANG T Y, LI K, LIN J Y, et al.Development of high-performance shake tables using the hierarchical control strategy and nonlinear control techniques[J]. Earthquake Engineering and Structural Dynamics, 2015, 44(11): 1717-1728.
|
[9] |
RYU K P, REINHORN A M. Real-time control of shake tables for nonlinear hysteretic systems [EB/OL]. [2016-04-22]. http://onlinelibrary.wiley.com/doi/10.1002/stc.1871/epdf. doi: 10.1002/stc.1871/epdf.
|
[10] |
SYMANS M, TWITCHELL B.System identification of a uniaxial seismic simulator[C]//Proc 12th Engineering Mechanics Conference. Reston, Viginia: American Society of Civil Engineers, 1998: 1485-1488.
|
[11] |
CONTE J P, TROMBETTI T L.Linear dynamic modeling of a uniaxial servo-hydraulic shaking table system[J]. Earthquake Engineering & Structural Dynamics, 2000, 29(9): 1375-1404.
|
[12] |
TROMBETTI T L, CONTE J P.Shaking table dynamics: results from a test-analysis comparison study[J]. Journal of Earthquake Engineering, 2002, 6(4): 513-551.
|
[13] |
TANG Z Y, LI Z B, ZHOU D X, et al.The effects on the earthquake simulation caused by the characteristics of the specimen in the shaking table tests-part(Ⅱ): the effects on the replaying orecision of the recorded seismic waves and the real-time compensation[J]. Journal of Beijing University of Technology, 2010, 36(9): 1199-1205. (in Chinese)
|
[14] |
LI Z B, TANG Z Y, JI J B.Overshoot modification of shaking table TVC algorithm[J]. Journal of Vibration and Shock, 2010, 29(10): 211-215. (in Chinese)
|
[15] |
THAYLER W J.Transfer functions for Moog servo valves [R]. New York: Technical Bulletin Moog Inc, 1958.
|
[16] |
北村春幸. 基于性能设计的建筑振动解析[M]. 裴星洙, 廖红建, 张立, 译. 西安: 西安交通大学出版社, 2006: 156-161.
|