Volume 43 Issue 2
Sep 2022
Turn off MathJax
Article Contents
JOURNAL OF MECHANICAL ENGINEERING  > 2017  >  43(2): 306-312.
Research Progress of Laser Bonding Process and Joint Properties of Non-metallic Materials[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 43(2): 306-312. doi: 10.11936/bjutxb2016050063
Citation: Research Progress of Laser Bonding Process and Joint Properties of Non-metallic Materials[J]. JOURNAL OF MECHANICAL ENGINEERING, 2017, 43(2): 306-312. doi: 10.11936/bjutxb2016050063
shu

Research Progress of Laser Bonding Process and Joint Properties of Non-metallic Materials

doi: 10.11936/bjutxb2016050063
  • 1.

    College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China

  • 2.

    Institute of Materials Engineering, Dortmund University of Technology, Dortmund 44227, Germany

  • Received Date: 25 May 2016
    Available Online: 13 Sep 2022
  • Issue Publish Date: 01 Feb 2017
    Abstract
  • The research progress of the laser beam welding process and the properties of joints between glass, ceramic, polymer, bulk metallic glass (bulk metallic glass, BMG) and metal were reviewed in this paper. The effects of laser welding power, welding speed, defocusing amount and the pressure on the performance of the joint were analyzed. The influence of femtosecond and nanosecond laser on the shear strength of metal-glass joints was compared with each other. The bonding mechanism and key factors influencing the reliable bonding of glass and metal, ceramic and metal & ceramic and polymer were also explored. The cracking problems of the high boron silicon glass on the surface of were solved by adding the intermediate layer. The pre-oxidation of metal surface can promote interface bonding and improve joints performance. At the same time, the weld preheat and the postweld heat treatment were adopted to reduce stress and cracks.

     

    • FullText(HTML)
  • loading
    • References(41)
  • [1]
    ZHANG W Z, CHEN Y L, MA Y Y.An overview of the research on the connection between inorganic nonmetallic materials and metal materials[J]. Welding Technology, 2015, 44(1): 1-4. (in Chinese)
    [2]
    MAI T A, SPOWAGE A C.Characterisation of dissimilar joints in laser welding of steel-kovar, copper-steel and copper-aluminium[J]. Materials Science and Engineering A, 2004, 374(1/2): 224-233.
    [3]
    BUTKUS S, GAIŽUSKAS E, PAIPULAS D, et al. Rapid microfabrication of transparent materials using filamented femtosecond laser pulses[J]. Applied Physics A, 2014, 114(1): 81-90.
    [4]
    UTSUMI A, OOIE T, YANO T, et al.Direct bonding of glass and metal using short pulsed laser[J]. Journal of Laser Micro Nanoengineering, 2007, 2(2): 133-136.
    [5]
    MATHIEUA A, SHABADIB R, DESXANDRE A, et al.Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)[J]. Optics and Laser Technology, 2007, 39(3): 652-661.
    [6]
    HLIE D, LACROIX F, VALLE R, et. al. Bonding of optial materials by femtosecond laser welding for aerospace and high power laser applications[C]∥SPIE Conference on Photonics North. Montreal: Jean-Claude kieffer, 2012: 841210-1-841210-7.
    [7]
    RICHTER S, DÖRING S, TÜNNERMANN A, et al. Bonding of glass with femtosecond laser pulses at high repetition rates[J]. Applied Physics A, 2011, 103(2): 257-261.
    [8]
    TAMAKI T, WATANABE W, NISHII J, et al.Welding of transparent materials using femtosecond laser pulses[J]. Japanese Journal of Applied Physics, 2005, 44(20): L687-L689.
    [9]
    LACROIX F, HLIE D, VALLE R. Optical bonding reinforced by femtosecond laser welding[C]∥Optical Manufacturing and Testing IX. San Diego: The International Society, 2011: 812612-1-812612-13.
    [10]
    ZHANG G D, CHENG G H.Direct welding of glass and metal by 1 kHz femtosecond laser pulses[J]. Journal of Applied Mechanics, 2015, 82(10): 8957-8961. (in Chinese)
    [11]
    NI X C, ANOOP K K, WANG X, et al.Dynamics of femtosecond laser-produced plasma ions[J]. Applied Physics A, 2014, 117(1): 111-115.
    [12]
    OZEKI Y, INOUE T, TAMAKI T, et al. Direct welding between copper and glass substrates with femtosecond laser pulses[J]. Applied Physics Express, 2008, 1(8): 08261-1-08261-3.
    [13]
    TU Y, JI L F, BAO Y, et al. Characterization and joining behavior of glass-to-kovar alloy fiber laser joint[J]. Advanced Materials Research, 2010, 154/155: 923-928.
    [14]
    LEI D Q, WANG Z F, LI J, et al.Experimental study of glass to metal seals for parabolic trough receivers[J]. Renewable Energy, 2012, 48: 85-91.
    [15]
    LEI D Q, WANG Z F, DU F L.The glass-to-metal sealing process in parabolic trough solar receivers[C]//Solar World Congress of the International-Solar-Energy-Society. Beijing: Berlin Heidelberg, 2007: 740-744.
    [16]
    LUO D W, LI X, SHEN Z S, et al.Effect of DM308 glass as transition layer on bonding mechanism of pyrex glass to kovar alloy[J].Transactions of Materials and Heat Treatment, 2012(8): 151-155. (in Chinese)
    [17]
    LUO D W, SHEN Z S.Wetting and spreading behavior of borosilicate glass on Kovar[J]. Journal of Alloys and Compounds, 2009, 477(1/2): 407-413.
    [18]
    WANG G, HUANG Y J, SHAGIEV M, et al.Laser welding of Ti40Zr25Ni3Cu12Be20 bulk metallic glass[J]. Materials Science and Engineering A, 2012, 541: 33-37.
    [19]
    LIU X, CHEN C J, WANG X N, et al.Research progress of glass and metal sealing[J].Welding Technology, 2014(5): 1-6. (in Chinese)
    [20]
    CHEN B, SHI T L, LIAO G L.Laser welding of Zr41Ti14Cu12Ni10Be23 bulk metallic glass and zirconium metal[J]. Journal of Wuhan University of Technology (Mater Sci Ed), 2014, 29(4): 786-788. (in Chinese)
    [21]
    CHEN B, SHI T L, LIC F, et al.Laser welding of annealed Zr55Cu30Ni5Al10 bulk metallic glass[J]. Intermetallics, 2014, 46: 111-117. (in Chinese)
    [22]
    WANG H S, CHEN H G, JANG J S C. Microstructure evolution in Nd: YAG laser-welded (Zr53Cu30Ni9Al8)Si0.5 bulk metallic glass alloy[J]. Journal of Alloys and Compounds, 2010, 495(1): 224-228.
    [23]
    TAKAKI K, FUJIMALI Y, TAKADA Y, et al.A capacitor discharge technique with optimized energy for joining ceramics[J]. Vacuum, 2002, 65(3): 457-462.
    [24]
    MENG J F.Study on the joints of TC4 alloy and Si3N4 ceramic with brazing and laser[D]. Tianjin: Tianjin University, 2014. (in Chinese)
    [25]
    SECHI Y, NAGATSUKA K, NAKATA K.Dissimilar laser brazing of h-BN and WC-Co alloy in Ar atmosphere without evacuation process[J]. Journal of Physics: Conference Series, 2012, 379(1): 12048-12057.
    [26]
    LEE Y M, KIM S W, KIM J, et al.Ceramic to metal joining by using 1064nm pulsed and CW laser energy source[J]. Journal of Mechanical Science and Technology, 2013, 27(9): 2823-2827.
    [27]
    KIM K, LEE J G, CHO H.Analysis of pulsed Nd: YAG laser welding of AISI 304 steel[J]. Journal of Mechanical Science and Technology, 2010, 24(11): 2253-2259.
    [28]
    LI Z R, GU W, FENG J C.Research status of ceramic and metal joining[J].Weld, 2008(3): 55-60, 72. (in Chinese)
    [29]
    广赖明夫. 金属基复合材料の结合[J]. 溶接学会誌, 1996, 65(4): 1692-1698.
    [30]
    LIPPMANN W, KNORR J, WOLF R, et al.Laser beam joining of non-oxidic ceramics for uitra high temperature resistant joints[EB/OL]. [2016-05-08].http://www.iaea.org/inis/collection/NLCollectionstore/_public/37/088/37088642.pdf. http://www.iaea.org/inis/collection/NLCollectionstore/_public/37/088/37088642.pdf.
    [31]
    CURICUTA V, LIU Y, ROBERTSON B W, et al.Furnace and laser methods of bonding metals to ceramics: interface investigation[J]. Materials Science and Engineering. B: Solid-State Materials for Advanced Technology, 2000, 68(3): 196-203.
    [32]
    BERAUD C, COURBIERE M, ESONOUF C, et al.Study of copper-alumina bonding[J]. Journal of Materials Science, 1989, 24(12): 4545-4554.
    [33]
    BALLE F, WAGNER G, EIFLER D.Ultrasonic spot welding of aluminum sheet/carbon fiber atinforced polymer-joints[J]. Materialwissensc-haft und Werkstofftechnik, 2007, 38(11): 934-938.
    [34]
    SCHRICKER K, STAMBKE M, BERGMANN J P.Experimental investigations and modeling of the melting layer in polymer-metal hybrid structures[J]. Welding in the World, 2015, 59(3): 407-412.
    [35]
    JUNG WOON K, KAWAHITO Y.Laser direct joining of CFRP to metal or engineering plastic[J]. Transactions of JWRI, 2013, 42(2): 5-8.
    [36]
    BERGMANN J P, STAMBKE M.Potential of laser-manufactured polymer-metal hybrid joints[J]. Physics Procedia, 2012, 39: 84-91.
    [37]
    JUNG K W, KAWAHITOA Y, KATAYAMAA S.Laser direct joining of carbon fibre reinforced plastic to stainless steel[J]. Science and Technology of Welding and Joining, 2011, 16(8): 676-680.
    [38]
    HOU Z X.Research and development of glass-ceramics[J]. Journal of Jilin Institute of Chemical Technology, 2006, 23(1): 33-38. (in Chinese)
    [39]
    FLORIANA-DANA B, WOLFGANG L, ANTONIO H.Laser-joined Al2O3 and ZrO2 ceramics for high-temperature applications[J]. Journal of Nuclear Materials, 2010, 405(1): 1-8.
    [40]
    FLORIANA-DANA B, WOLFGANG L, ANTONIO H, et al.Glasses for laser joining of zirconia ceramics[J]. Journal of the European Ceramic Society, 2014, 34(3): 765-772.
    [41]
    VOLKER F, UDO K.Lasers join ceramic and polymer components[J]. Industrial Laser Solutions, 2009, 24(10): 10-14.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    Figures(3)  / Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views(97) PDF downloads(0) Cited by()
    Proportional views
    Related

    Copyright © 2009《 石油钻探技术 》 All Rights Reserved.

    Address：North-Star Times Tower, No.8 Beichendong Road, Chaoyang District, Beijing, China China Pos：100101

    Tel：010-84988317，84988356，84988357 Fax：021-64253812 Email：syzt@vip.163.com

    Beijing public network security equipment 11010502036328　Beijing ICP backup 17033152

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return