Citation: | DONG Lei, RAN Maoying, SHAO Liwei, GAO Mengqi, YU Kunyang. Performance Analysis and Structure Optimization of Synchronous Switched Reluctance Motor[J]. JOURNAL OF MECHANICAL ENGINEERING, 2022, 42(7): 741-748. doi: 10.15918/j.tbit1001-0645.2021.172 |
[1] |
WANG K, ZHU Z Q, OMBACH G, et al. Torque ripple reduction of synchronous reluctance machines: optimal slot/pole and flux-barrier layer number combinations[J]. COMPEL International Journal of Computations and Mathematics in Electrical, 2013, 34(1):1 − 8.
|
[2] |
LEE J K, JUNG D H, LIM J, et al. A study on the synchronous reluctance motor design for high torque by using RSM[J]. IEEE Transactions on Magnetics, 2018(99):1 − 5.
|
[3] |
BIANCHI N, BOLOGNANI S, BON D, et al. Rotor flux-barrier design for torque ripple reduction in synchronous reluctance and PM-assisted synchronous reluctance motors[J]. IEEE Transactions on Industry Applications, 2009, 45(3):921 − 928. doi: 10.1109/TIA.2009.2018960
|
[4] |
HOWARD E. Flux barrier and skew design optimization of reluctance synchronous machines[C]//Proceedings of International Conference on Electrical Machines - ICEM. [S. l. ]: IEEE, 2014.
|
[5] |
BIANCHI N, DEGANO M, FORNASIERO E. Sensitivity analysis of torque ripple reduction of synchronous reluctance and interior PM motors[C]//Proceedings of Energy Conversion Congress and Exposition (ECCE). [S. l. ]: IEEE, 2013.
|
[6] |
王磊, 姜瑞. 电压比例缩放谐波注入永磁同步电机高速驱动方法[J]. 北京理工大学学报, 2018, 38(1):26 − 32.
WANG Lei, JIANG Rui. Voltage scaling harmonic injection permanent magnet synchronous motor high-speed drive method[J]. Transactions of Beijing Institute of Technology, 2018, 38(1):26 − 32. (in Chinese)
|
[7] |
LIU X, PAN Z P, ZHU Q. Analysis of average torque in switched reluctance motor with unipolar and bipolar excitations based on an improved Fourier series model[C]//Proceedings of IEEE Vehicle Power and Propulsion Conference. Lille: [s. n.], 2010.
|
[8] |
沈建新, 蔡顺, 郝鹤, 等. 同步磁阻电机分析与设计(连载之四)绕组形式的分析与选择[J]. 微电机, 2016(11):93 − 97.
SHEN Jianxin, CAI Shun, HAO He, et al. Analysis and design of synchronous reluctance motor (part 4) analysis and selection of winding forms[J]. Micro Motors, 2016(11):93 − 97. (in Chinese)
|
[9] |
黄万友, 王广灿, 于明进, 等. 基于田口鲁棒优化的电动汽车驱动控制策略研究[J]. 北京理工大学学报, 2019, 39(5):497 − 501.
HUANG Wanyou, WANG Guangcan, YU Mingjin, et al. Research on electric vehicle drive control strategy based on taguchi robust optimization[J]. Transactions of Beijing Institute of Technology, 2019, 39(5):497 − 501. (in Chinese)
|
[10] |
GONG Y , ZHAO S , LUO S . Design and optimization of switched reluctance motor by Taguchi method[C]// Proceedings of the 2018 13th IEEE Conference on Industrial Electronics and Applications (ICIEA). [S. l. ]: IEEE, 2018: 1876 − 1880.
|
[11] |
SIADATAN A, ROOHISANKESTANI M, FARHANGIAN S. Design and simulation of a new switched reluctance motor with changes in the shape of stator and rotor in order to reduce torque ripple and comparison with the conventional motor[C]//Proceedings of 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). Amalfi, Italy: [s. n. ], 2018: 353 − 358.
|
[12] |
韩爱国, 苑昭, 郑青星, 等. 正交法在永磁同步电机优化设计中的应用[J]. 汽车实用技术, 2019, 285(6):48 − 52.
HAN Aiguo, YUAN Zhao, ZHENG Qingxing, et al. Application of Taguchi method in optimal design of permanent magnet synchronous motor[J]. Automobile Practical Technology, 2019, 285(6):48 − 52. (in Chinese)
|
[13] |
SI J, ZHAO S, FENG H, et al. Multi-objective optimization of surface-mounted and interior permanent magnet synchronous motor based on Taguchi method and response surface method[J]. Chinese Journal of Electrical Engineering, 2018, 4(1):67 − 73. doi: 10.23919/CJEE.2018.8327373
|