Volume 58 Issue 24
Dec 2022
Turn off MathJax
Article Contents
JOURNAL OF MECHANICAL ENGINEERING  > 2022  >  58(24): 1-9.
SHI Zhaoyao, ZHAO Baoya, YU Bo, SUN Yanqiang. Unified Model of Gear Characteristic Lines and Its Application in the Evaluation of Gears 3D Deviation[J]. JOURNAL OF MECHANICAL ENGINEERING, 2022, 58(24): 1-9. doi: 10.3901/JME.2022.24.001
Citation: SHI Zhaoyao, ZHAO Baoya, YU Bo, SUN Yanqiang. Unified Model of Gear Characteristic Lines and Its Application in the Evaluation of Gears 3D Deviation[J]. JOURNAL OF MECHANICAL ENGINEERING, 2022, 58(24): 1-9. doi: 10.3901/JME.2022.24.001
shu

Unified Model of Gear Characteristic Lines and Its Application in the Evaluation of Gears 3D Deviation

doi: 10.3901/JME.2022.24.001
  • 1.

    Beijing Engineering Research Center of Precision Measurement Technology and Instruments, Beijing University of Technology, Beijing 100124

  • 2.

    School of Mechatronics Engineering, North China Institute of Aerospace Engineering, Langfang 065000

  • Received Date: 05 May 2022
  • Rev Recd Date: 25 Oct 2022
    • Available Online: 07 Mar 2024
  • Issue Publish Date: 20 Dec 2022
    Abstract
  • There are many kinds of characteristic curves that characterize involute helical gears. The most well-known are involute and helix with clear geometrical definition. In fact, there are other characteristic curves with outstanding engineering value such as profile of path of contact and contact line on the tooth surface. However, the addition of characteristic lines brings two problems. One is that the complex equations of the characteristic curves are not related to each other and lack mathematical unity. The other is that except for involute and helix, other characteristic curves have no measuring method, which results in a lack of measurability. According to the characteristics of involute gear transmission, the characteristic curves on the tooth surface are mapped to the meshing plane. It is found that each characteristic curves on the tooth surface has its corresponding 2-D straight line in the meshing plane. Based on this, a straight-line model is established to uniformly express various characteristic curves on the tooth surface. On basis of the 3-D deviation measurement data of the gear and the unified model of the characteristic curves, the extraction method of the deviations of various characteristic curves is proposed, which is applied to the measurement practice. By comparing with the profile deviation and helix deviation measured by the general gear measuring instrument, the effectiveness and practicability of the unified model of the characteristic curves and the extraction method of the deviations of the characteristic curves are proved, and the measurability of the complex characteristic curves on the tooth surface is solved. Meanwhile, the unified model of the gear characteristic curves also has important application value in the traceability of gear process error and the prediction of transmission performance.

     

    • FullText(HTML)
  • loading
    • References(18)
  • [1]
    中国机械工程学会. 中国机械工程技术路线图[M]. 北京: 机械工业出版社, 2022.

    Chinese Mechanical Engineering Society. Technology roadmaps of Chinese mechanical engineering[M]. Beijing: China Machine Press, 2022.
    [2]
    姚南珣. 复杂曲面优化造形[M]. 大连: 大连理工大学出版社, 1996.

    YAO Nanxin. Optimization of complex surface[M]. Daliang: Daliang University of Science and Technology Press, 1996.
    [3]
    石照耀. 复杂螺旋曲面特征线测量的理论与技术研究[D]. 合肥: 合肥工业大学, 2001.

    SHI Zhaoyao. Research on the theory & technology of measurement for characterized curves of complex helicoidal surface[D]. Hefei: Hefei University of Technology, 2001.
    [4]
    ISO 1328-1: 2013(E), cylindrical gears-ISO system of flank tolerance classification-Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth[S]. New York: ISO, 2013.
    [5]
    ISO/TR 10064-1: 2019, Code of inspection practice-Part 1: Measurement of cylindrical gear tooth flanks[S]. New York: ISO, 2019.
    [6]
    COLBOURNE. J R. The geometry of involute gears[M]. New York: Springer-Verlag, 1987.
    [7]
    李特文. 齿轮啮合原理[M]. 上海: 上海科学技术出版社, 1984.

    LITVIN F L. The theory of gear meshing[M]. Shanghai: Shanghai Science and Technology Press, 1984.
    [8]
    PARAG W, DOUGLAS B. Gear noise analysis: design and manufacturing challenges drive new solutions for noise reduction[J]. Gear Technology, 2019(7): 42-49.
    [9]
    石照耀, 费业泰, 谢华锟. 齿轮测量技术100年——回顾与展望[J]. 中国工程科学, 2003, 5(9): 13-17. https://www.cnki.com.cn/Article/CJFDTOTAL-GCKX200309002.htm

    SHI Zhaoyao, FEI Yetai, XIE Huakun. 100 years of gear measurement technology: Review and prospect[J]. China Engineering Science, 2003, 5(9): 13-17. https://www.cnki.com.cn/Article/CJFDTOTAL-GCKX200309002.htm
    [10]
    GOCH G. Gear metrology[J]. Annals of the CIRP, 2003, 52(2): 659-695. doi: 10.1016/S0007-8506(07)60209-1
    [11]
    石照耀, 于渤, 宋辉旭, 等. 20年来齿轮测量技术的发展[J]. 中国机械工程, 2022, 33(9): 1009-10024. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX202209001.htm

    SHI Zhaoyao, YU Bo, SONG Huixu, et al. Development of gear measurement technology in the last 20 years[J]. China Mechanical Engineering, 2022, 33(9): 1009-1024. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX202209001.htm
    [12]
    NI Kang. Areal gear metrology with modified flanks[D]. North Carolina: University of North Carolina at Charlotte, 2017.
    [13]
    PRZYKLENK A, REAVIE T, STEIN M, et al. Holistic evaluation of involute gears[J]. Power Transmission Engineering, 2022(4): 40-48.
    [14]
    王笑一, 石照耀. 基于全信息的齿轮精度评价体系[J]. 中国科学: 技术科学, 2017, 47(1): 46-59. https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK201701005.htm

    WANG Xiaoyi, SHI Zhaoyao. Evaluation system of gear accuracy based on full information[J]. Scientia Sinica Technologica, 2017, 47(1): 46-59. https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK201701005.htm
    [15]
    石照耀, 赵保亚, 于渤, 等. 齿轮三维误差表征与分解[J/OL]. 机械工程学报, [2022-04-21]. http://kns.cnki.net/kcms/detail/11.2187.th.20220315.1844.020.html.

    SHI Zhaoyao, ZHAO Baoya, YU Bo, et al. Characterization and decomposition of gear 3-d deviation[J/OL]. Journal of Mechanical Engineering, [2022-04-21]. http://kns.cnki.net/kcms/detail/11.2187.th.20220315.1844.020.html.
    [16]
    HUANG Tongnian. The Development of gear integrated error measurement in China[C]//Proceedings of Inter. Conf. of Gearing, Zhengzhou, 1989: 25-31.
    [17]
    GUO Xiaozhong, SHI Zhaoyao, YU Bo, et al. 3D Measurement of Gears Based on a Line Structured Light Sensor[J]. Precision Engineering, 2020, 61(1): 160-169.
    [18]
    石照耀, 孙衍强. 齿轮三维测量中线激光传感器位姿标定方法[J]. 仪器仪表学报, 2021, 42(12): 39-46. https://www.cnki.com.cn/Article/CJFDTOTAL-YQXB202112005.htm

    SHI Zhaoyao, SUN Yanqiang. Position and Attitude calibration method of linear laser sensor in gear 3D measurement[J]. Chinese Journal of Scientific Instrument, 2021, 42(12): 39-46. https://www.cnki.com.cn/Article/CJFDTOTAL-YQXB202112005.htm
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    Figures(13)  / Tables(1)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views(16) PDF downloads(0) Cited by()
    Proportional views
    Related

    Copyright © 2009《 石油钻探技术 》 All Rights Reserved.

    Address：North-Star Times Tower, No.8 Beichendong Road, Chaoyang District, Beijing, China China Pos：100101

    Tel：010-84988317，84988356，84988357 Fax：021-64253812 Email：syzt@vip.163.com

    Beijing public network security equipment 11010502036328　Beijing ICP backup 17033152

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return