Volume 58 Issue 24
Dec 2022
Turn off MathJax
Article Contents
JOURNAL OF MECHANICAL ENGINEERING  > 2022  >  58(24): 49-57.
HU Bin, YAN Liang, ZHANG Yangeng, FAN Mengbao. Research on Magnetic Memory Detection and Compensation Method for Early Damage of Tubular Components[J]. JOURNAL OF MECHANICAL ENGINEERING, 2022, 58(24): 49-57. doi: 10.3901/JME.2022.24.049
Citation: HU Bin, YAN Liang, ZHANG Yangeng, FAN Mengbao. Research on Magnetic Memory Detection and Compensation Method for Early Damage of Tubular Components[J]. JOURNAL OF MECHANICAL ENGINEERING, 2022, 58(24): 49-57. doi: 10.3901/JME.2022.24.049
shu

Research on Magnetic Memory Detection and Compensation Method for Early Damage of Tubular Components

doi: 10.3901/JME.2022.24.049
  • 1.

    China Special Equipment Inspection & Research Institute, Beijing 100029

  • 2.

    School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116

  • 3.

    School of Metrology and Testing Engineering, China Jiliang University, Hangzhou 310018

  • Received Date: 30 Mar 2022
  • Rev Recd Date: 02 Sep 2022
    • Available Online: 07 Mar 2024
  • Issue Publish Date: 20 Dec 2022
    Abstract
  • The tubular member is a commonly used engineering member, which will cause heavy losses in the event of an accident. Stress concentration is an important cause of component failure. Magnetic memory testing method is an effective stress concentration testing method. Circumferential scanning magnetic memory detection is performed on cylindrical components, and changes in the action of the earth's magnetic field affect the detection results, which are likely to cause misjudgment of stress concentration areas. The geomagnetic field distribution model on the outer surface of the ferromagnetic cylindrical member is established, and the effect and compensation method of the geomagnetic field on the outer surface of the cylindrical member are explored. The experimental results show that the normal component and amplitude are about twice the geomagnetic field when the ferromagnetic cylindrical member is scanned circumferentially. The normal component of the magnetic signal minus 2 times the geomagnetic field is used as the magnetic memory detection compensation method for cylindrical components, and the correlation coefficient between the compensation and the linear scan is stable above 0.8, which is better than the traditional reverse compensation method. The proposed compensation method for cylindrical components effectively improves the positioning accuracy of stress concentration areas.

     

    • FullText(HTML)
  • loading
    • References(19)
  • [1]
    邢海燕, 王犇, 王学增, 等. 基于双正交法的焊缝早期隐性损伤临界状态磁记忆特征[J]. 机械工程学报, 2015, 51(16): 71-76. doi: 10.3901/JME.2015.16.071

    XING Haiyan, WANG Ben, WANG Xuezeng, et al. Metal magnetic memory critical characteristics of early hidden damage of welded joints based on the biorthogonal method[J]. Journal of Mechanical Engineering, 2015, 51(16): 71-76. doi: 10.3901/JME.2015.16.071
    [2]
    ZHOU W, FAN J, LIU X, et al. Metal magnetic memory testing of the drilling riser pipeline steel based on pulsating-impact-fatigue test[J]. Materials Science Forum, 2020, 975: 15-24. doi: 10.4028/www.scientific.net/MSF.975.15
    [3]
    HU B, YU R. Influence of sensitivity direction and lift-off on weld macro defects by magnetic memory testing[J]. Insight Non-destructive Testing and Condition Monitoring, 2018, 60(3): 161-165. doi: 10.1784/insi.2018.60.3.161
    [4]
    SHI P. Magneto-elastoplastic coupling model of ferromagnetic material with plastic deformation under applied stress and magnetic fields[J]. Journal of Magnetism and Magnetic Materials, 2020, 512: 166980. doi: 10.1016/j.jmmm.2020.166980
    [5]
    YUAN X, LI W, CHEN G, et al. Inspection of both inner and outer cracks in aluminum tubes using double frequency circumferential current field testing method[J]. Mechanical Systems and Signal Processing, 2019, 127(15): 16-34.
    [6]
    SU S, WEI L, WANG W, et al. Equivalent stress for steel box girder with corrugated web under bending based on magnetic memory method[J]. International Journal of Applied Electromagnetics and Mechanics, 2019, 62(10): 1-16.
    [7]
    张卫民, 邱忠超, 袁俊杰, 等. 关于利用金属磁记忆方法进行应力定量化评价问题的讨论[J]. 机械工程学报, 2015, 51(8): 9-13. doi: 10.3901/JME.2015.08.009

    ZHANG Weimin, QIU Zhongchao, YUAN Junjie, et al. Discussion on stress quantitative evaluation using metal magnetic memory method[J]. Chinese Journal of Mechanical Engineering, 2015, 51(8): 9-13. doi: 10.3901/JME.2015.08.009
    [8]
    ZHANG P, SHI P, JIN K, et al. An anisotropic magneto-mechanical model of ferromagnetic materials for the magnetic memory testing method[J]. Journal of Applied Physics, 2019, 125(23): 1-10.
    [9]
    LIU S, LI Z, JIN S, et al. Application of metal magnetic memory testing technology in pipeline defect[J]. DEStech Transactions on Engineering and Technology Research, 2017, 233-236.
    [10]
    GAO F, FAN J, ZHANG L, et al. Magnetic crawler climbing detection robot basing on metal magnetic memory testing technology[J]. Robotics and Autonomous Systems, 2020, 125: 103439. doi: 10.1016/j.robot.2020.103439
    [11]
    DUBOV A A. The method of metal magnetic memory the new trend in engineering diagnostics[J]. Welding in the World, 2005, 49(9): 314-319.
    [12]
    任吉林, 孙金立, 周培, 等. 磁记忆二维检测的研究与工程应用[J]. 机械工程学报, 2013, 49(22): 8-15. http://www.cjmenet.com.cn/CN/Y2013/V49/I22/8

    REN Jilin, SUN Jinli, ZHOU Pei, et al. Research and engineering application of magnetic memory two-dimensional maeasurement[J]. Journal of Mechanical Engineering, 2013, 49(22): 8-15. http://www.cjmenet.com.cn/CN/Y2013/V49/I22/8
    [13]
    LI C, DONG L, WANG H, et al. Metal magnetic memory technique used to predict the fatigue crack propagation behavior of 0.45%C steel[J]. Journal of Magnetism and Magnetic Materials, 2016, 405(1): 150-157.
    [14]
    LIU B, ZENG Z, WANG H. Study on the early fatigue damage evaluation of high strength steel by using three components of metal magnetic memory signal[J]. NDT & E International, 2021, 117: 102380.
    [15]
    SHI P, SU S, CHEN Z. Overview of researches on the nondestructive testing method of metal magnetic memory: Status and challenges[J]. Journal of Nondestructive Evaluation, 2020, 39(43): 1-37.
    [16]
    时朋朋, 郝帅. 磁记忆检测的力磁耦合型磁偶极子理论及解析解[J]. 物理学报, 2021, 70(3): 034101. https://www.cnki.com.cn/Article/CJFDTOTAL-WLXB202103010.htm

    SHI Pengpeng, HAO Shuai. Analytical solution of magneto-mechanical magnetic dipole model for metal magnetic memory method[J]. Acta Physica Sinica, 2021, 70(3): 034101. https://www.cnki.com.cn/Article/CJFDTOTAL-WLXB202103010.htm
    [17]
    SHI P. Magneto-mechanical model of ferromagnetic material under a constant weak magnetic field via analytical anhysteresis solution[J]. Journal of Applied Physics, 2020, 128(11): 115102.
    [18]
    HUANG H, YANG C, QIAN Z, et al. Magnetic memory signals variation induced by applied magnetic field and static tensile stress in ferromagnetic steel[J]. Journal of Magnetism & Magnetic Materials, 2016, 416: 213-219.
    [19]
    胡斌, 沈功田. 磁记忆检测技术在压力容器上的应用[J]. 无损检测, 2015, 37(12): 75-81. https://www.cnki.com.cn/Article/CJFDTOTAL-WSJC201512020.htm

    HU Bin, SHEN Gongtian. Application of magnetic memory testing technology in pressure vessel[J]. Nondestructive Testing, 2015, 37(12): 75-81. https://www.cnki.com.cn/Article/CJFDTOTAL-WSJC201512020.htm
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    Figures(16)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views(21) PDF downloads(0) Cited by()
    Proportional views
    Related

    Copyright © 2009《 石油钻探技术 》 All Rights Reserved.

    Address：North-Star Times Tower, No.8 Beichendong Road, Chaoyang District, Beijing, China China Pos：100101

    Tel：010-84988317，84988356，84988357 Fax：021-64253812 Email：syzt@vip.163.com

    Beijing public network security equipment 11010502036328　Beijing ICP backup 17033152

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return