Citation: | Lei Rongliang, Li Yun, Lin Wumei, Zhang Shuai, Qing Jianhong, Tang Linfeng. Research on the calculation method of the ultra-precision turning trajectory of large-vector high-convex cylinders[J]. JOURNAL OF MECHANICAL ENGINEERING, 2021, 48(3): 200192. doi: 10.12086/oee.2021.200192 |
[1] |
范占斌. 圆柱表面微结构超精密加工关键技术研究[D]. 长沙: 国防科学技术大学, 2014. http://cdmd.cnki.com.cn/article/cdmd-90002-1016921217.htm
Fan Z B. Research on key technology in ultra-precision turning processing of microstructure on cylindrical surface[D]. Changsha: National University of Defense Technology, 2014. http://cdmd.cnki.com.cn/article/cdmd-90002-1016921217.htm
|
[2] |
刘鑫, 张满, 史立芳, 等. 一种大F数微透镜阵列的制备方法[J]. 光子学报, 2017, 46(2): 0222004. https://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201702005.htm
Liu X, Zhang M, Shi L F, et al. Fabrication method for the microlens array of high F-number[J]. Acta Photon Sini, 2017, 46(2): 0222004. https://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201702005.htm
|
[3] |
徐礼威. 微透镜阵列超精密切削加工技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2015. http://cdmd.cnki.com.cn/Article/CDMD-10213-1015980583.htm
Xu L W. Research on ultra-precision turning technology of microlens array[D]. Harbin: Harbin Institute of Technology, 2015. http://cdmd.cnki.com.cn/Article/CDMD-10213-1015980583.htm
|
[4] |
田霏, 刘现磊, 张效栋, 等. 微透镜阵列加工误差对光学性能的影响[J]. 光学学报, 2016, 36(2): 0222002. https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201602025.htm
Tian F, Liu X L, Zhang X D, et al. Influence of manufacture error on optical performance of micro lens array[J]. Acta Opt Sin, 2016, 36(2): 0222002. https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201602025.htm
|
[5] |
肖艳芬, 朱菁, 杨宝喜, 等. 用于光刻机照明均匀化的微柱面镜阵列设计[J]. 中国激光, 2013, 40(2): 0216001. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201302040.htm
Xiao Y F, Zhu J, Yang B X, et al. Design of micro-cylindrical-lens array used for illumination uniformization in lithography systems[J]. Chinese J Lasers, 2013, 40(2): 0216001. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201302040.htm
|
[6] |
王灏, 董连和, 朱国栋, 等. 车削掩模的石英非球面微透镜阵列制作方法[J]. 光电工程, 2018, 45(4): 170671. doi: 10.12086/oee.2018.170671
Wang H, Dong L H, Zhu G D, et al. Fabrication method of quartz aspheric microlens array for turning mask[J]. Opto-Electron Eng, 2018, 45(4): 170671. doi: 10.12086/oee.2018.170671
|
[7] |
张为国, 董小春, 杜春雷. 微透镜列阵成像光刻技术[J]. 红外与激光工程, 2010, 39(3): 469-472. doi: 10.3969/j.issn.1007-2276.2010.03.019
Zhang W G, Dong X C, Du C L. Microlens array imaging-based photolithography technique[J]. Infrared Laser Eng, 2010, 39(3): 469-472. doi: 10.3969/j.issn.1007-2276.2010.03.019
|
[8] |
史立芳, 叶玉堂, 邓启凌, 等. 制备人工复眼结构的方法[J]. 红外与激光工程, 2013, 42(9): 2462-2466. doi: 10.3969/j.issn.1007-2276.2013.09.030
Shi L F, Ye Y T, Deng Q L, et al. Method to fabricate artificial compound eye[J]. Infrared Laser Eng, 2013, 42(9): 2462-2466. doi: 10.3969/j.issn.1007-2276.2013.09.030
|
[9] |
Chakrabarti M, Dam-Hansen C, Stubager J, et al. Replication of optical microlens array using photoresist coated molds[J]. Opt Express, 2016, 24(9): 9528-9540. doi: 10.1364/OE.24.009528
|
[10] |
Zhou W C, Zhang L, Yi A Y. Design and fabrication of a compound-eye system using precision molded chalcogenide glass freeform microlens arrays[J]. Optik, 2018, 171: 294-303. doi: 10.1016/j.ijleo.2018.06.033
|
[11] |
Mukaida M, Yan J W. Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo[J]. Int J Mach Tools Manuf, 2017, 115: 2-4. doi: 10.1016/j.ijmachtools.2016.11.004
|
[12] |
史成勇. 仿生曲面复眼系统设计及其图像处理研究[D]. 长春: 中国科学院大学(中国科学院长春光学精密机械与物理研究所), 2017. http://d.wanfangdata.com.cn/thesis/Y3353261
Shi C Y. Research on the design and image process of bioinspired spherical compound eve imaging system[D]. Changchun: University of Chinese Academy of Sciences (Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences), 2017. http://d.wanfangdata.com.cn/thesis/Y3353261
|
[13] |
张雄, 宋乐, 张姗姗, 等. 仿生复眼系统标定及测量方法研究[J]. 光电工程, 2014, 41(3): 35-42. doi: 10.3969/j.issn.1003-501X.2014.03.006
Zhang X, Song L, Zhang S S, et al. The method for the calibration and measurement of bionic compound-eye system[J]. Opto-Electron Eng, 2014, 41(3): 35-42. doi: 10.3969/j.issn.1003-501X.2014.03.006
|
[14] |
李荣彬, 杜雪, 张志辉, 等. 光学微结构的超精密加工技术[J]. 纳米技术与精密工程, 2003, 1(1): 57-61. https://www.cnki.com.cn/Article/CJFDTOTAL-NMJM200301014.htm
Li R B, Du X, Zhang Z H, et al. Ultra-precision machining of optical microstructures[J]. Nanotechnol Prec Eng, 2003, 1(1): 57-61. https://www.cnki.com.cn/Article/CJFDTOTAL-NMJM200301014.htm
|
[15] |
朱登超. 光学微结构快速车削工艺研究与精度分析[D]. 长沙: 国防科学技术大学, 2010. http://cdmd.cnki.com.cn/Article/CDMD-90002-1011279580.htm
Zhu D C. Technology study and accuracy analysis of optical microstructures manufactured by fast tool servo[D]. Changsha: National University of Defense Technology, 2010. http://cdmd.cnki.com.cn/Article/CDMD-90002-1011279580.htm
|
[16] |
张效栋, 王志诚, 曾臻, 等. 微透镜阵列超精密切削正弦过渡路径优化设计[J]. 纳米技术与精密工程, 2017, 15(4): 239-245. https://www.cnki.com.cn/Article/CJFDTOTAL-NMJM201704001.htm
Zhang X D, Wang Z C, Zeng Z, et al. Optimized design of sine-transition cutting path for microlens array in ultra-precision cutting[J]. Nanotechnol Prec Eng, 2017, 15(4): 239-245. https://www.cnki.com.cn/Article/CJFDTOTAL-NMJM201704001.htm
|
[17] |
黄昆涛, 房丰洲, 宫虎. 超精密车削表面微观形貌对光学特性的影响[J]. 光学 精密工程, 2013, 21(1): 101-107. https://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201301017.htm
Huang K T, Fang F Z, Gong H. Effect of surface microscopic topology generated by ultra-precision turning on optical characteristics[J]. Opt Prec Eng, 2013, 21(1): 101-107. https://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201301017.htm
|
[18] |
何成奎, 张平, 李东, 等. 超精密车削表面质量影响因素及发展趋势研究[J]. 装备制造技术, 2017(11): 12-15. https://www.cnki.com.cn/Article/CJFDTOTAL-GXJX201711005.htm
He C K, Zhang P, Li D, et al. Research on influencing factors and development trend of surface quality in ultra precision turning[J]. Equip Manuf Technol, 2017(11): 12-15. https://www.cnki.com.cn/Article/CJFDTOTAL-GXJX201711005.htm
|
[19] |
张效栋, 房丰洲, 程颖. 自由曲面超精密车削加工路径优化设计[J]. 天津大学学报, 2009, 42(3): 278-282. https://www.cnki.com.cn/Article/CJFDTOTAL-TJDX200903018.htm
Zhang X D, Fang F Z, Cheng Y. Optimized design of cutting path for freeform surface in ultra-precision turning[J]. J Tianjin Univ, 2009, 42(3): 278-282. https://www.cnki.com.cn/Article/CJFDTOTAL-TJDX200903018.htm
|
[20] |
王毅, 余景池. 超精密车削金刚石刀具刃口误差的高精度补偿[J]. 光电工程, 2011, 38(1): 98-102. doi: 10.3969/j.issn.1003-501X.2011.01.019
Wang Y, Yu J C. Compensation for error of diamond tool's cutting edge in single diamond turning[J]. Opto-Electron Eng, 2011, 38(1): 98-102. doi: 10.3969/j.issn.1003-501X.2011.01.019
|
[21] |
于慧娟. 光学自由曲面单点金刚石超精密车削理论与技术研究[D]. 长春: 吉林大学, 2015. http://cdmd.cnki.com.cn/Article/CDMD-10183-1015598327.htm
Yu H J. Theoretical and technological research on optical freeform surface of single point diamond ultra-precision turning[D]. Changchun: Jilin University, 2015. http://cdmd.cnki.com.cn/Article/CDMD-10183-1015598327.htm
|